“As an Amazon Associate, I earn from qualifying purchases. Without Any Extra Cost to You!”
Rechargeable batteries are used in Nikon Coolpix cameras, which implies that you must recharge them by following the correct order of charging once the batteries have been depleted.
Once the battery is fully charged, you can use the camera once more until the cells are ultimately charged.
If the battery door cap is damaged, the error message “Battery depleted” may appear on your screen.
It would be better to take it to a Nikon repair shop for a replacement to get it fixed correctly. You can also try charging your batteries with a wall charger if you like.
This article includes various reasons why the Nikon camera says the battery is exhausted. It also contains the solutions to these significant problems and the easiest way to address them.
You will also find the answers to some of the frequently asked questions. These answers will help you understand more about the Nikon cameras.
Reasons why a Nikon camera says battery exhausted
1. Batteries getting too hot
Storing the battery in excessively hot or very cold conditions might shorten its life lifetime and even be hazardous. Nikon recommended that you keep the battery just between 15 and 25 degrees.
Canon does not specify a minimum temperature, although they have warned that batteries should not be stored in temperatures more than 30 degrees.
If the batteries exceed this temperature, they may lead to a notice ”battery is depleted.”
2. Depletion of the battery
As soon as the battery is depleted, the shutter locks and must be unlocked by setting the shutter speed lever to the M250 or B settings that are mechanical and operate independently of the battery.
The low battery alert will sound before the battery is completely spent, and the camera will turn off to avoid the battery from becoming completely depleted ultimately.
Lithium-ion batteries can only be recharged a limited number of times before their capacity begins to deteriorate significantly.
Before the power is reduced to 80 percent, based on the technology being employed, it takes approximately 400 cycles.
These rounds are total charges up. Not every recharge (for example, recharging the batteries from 0 to 100 percent is one cycle; charging the cell from 50 to 100 percent is merely half a cycle.
The battery should be used until the camera stops working due to a low battery level, and there is no reason not to recharge it sooner rather than later.
3. Improper setting of the batteries
The most prevalent causes of battery failure are incorrect charge settings and a failure to make system modifications.
Under or overcharging, capacity loss, and eventual battery failure are all possible consequences of failing to program the manufacturer’s suggested charge voltage, charge duration and adapt for changing charge circumstances into the battery’s memory.
How to fix battery exhausted error on the Nikon camera
1. Ensure that the settings of the batteries are correct
If your Nikon camera’s battery settings are incorrect, you may receive the warning “Battery depleted.” The following steps can help you to correct the situation;
i. Select Menu from your camera’s Menu after it has been turned on.
ii. The Setup section can be found by going to the menu bar and selecting “Battery type.”
iii. Once you have selected the proper battery type for your needs, click the OK button.
iv. This should put an end to the situation for now.
2. Replace your batteries
When your batteries are genuinely exhausted, this error message may show. Replace the batteries if you want to correct the situation.
Several customers stated they solved the problem by first replacing their batteries with alkaline cells and then inserting the rechargeable batteries.
Many users noted that the issue was resolved after swapping to Lithium-ion batteries, so you might want to give that a shot as well.
3. Properly charge the batteries.
The process of charging batteries is time-consuming, and you should charge your batteries for several hours to ensure that they are fully charged.
According to customers, 6 to 8 hrs of charging should be sufficient, but depending on the capacity of your battery, you may require even more time.
4. Connect the charger correctly.
The charger must be connected correctly for your camera to be charged appropriately. According to this, the correct order is;
i. To use the charging adaptor, connect the USB cable.
ii. The adapter must now be connected to a wall outlet to function.
iii. Double-check to see that the camera is not recording any video.
iv. Connect the USB cord to the back of your camera now to complete the connection.
5. Check the battery door cap.
If the battery door cap is damaged, the error “Battery depleted” may appear on your screen. It would be better to take it to a Nikon repair shop for a replacement to get it fixed correctly.
You can also try charging your batteries with a wall charger if you like. Battery depletion errors on Nikon cameras can be resolved in a variety of ways.
Frequently Asked Questions About Nikon camera
What should one do if the Nikon camera does not charge?
Although it may seem foolish, you may need to connect the camera and charging adaptor in a particular order.
If you’re using a charging adaptor, Nikon’s answers forum recommends that you plug in the USB cable first.
if you want to charge the camera without a charger then check the guide charge Nikon camera without charger
In conclusion, verify that the mains power cable is securely attached to both the Nikon battery charger and the main power socket before using the charger.
If the wall power socket isn’t working, double-check that it is, or try a different power outlet on the wall.
Assuming there is no damage to the mains power cable, it may be possible to utilize the cable to charge another device.
Nikon cameras require batteries that need to be recharged, so once the battery has run out, recharge it in the proper order.
To avoid damaging the camera, make sure you wait until your batteries are fully charged before taking pictures.
If you follow the above steps keenly, the Nikon battery should respond positively. If it does not answer, you must double-check to ascertain that everything is in the proper position.
If this does not work still, you need to seek help from a professional. This will help avoid causes further damages.